高性能漆包线脱漆机

The SZ-188 multi-strand enameled wire paint stripping machine includes a mechanical transmission device and two stripping wheels, namely a first stripping wheel and a second stripping wheel, which are driven by the mechanical transmission device respectively. The surfaces of the first and second stripping wheels are rough, and the enameled flat copper wire extends into the gap between the first and second stripping wheels. Its advantage is that when the enameled flat copper wire extends into the gap between the first and second stripping wheels, the rough-surfaced first and second stripping wheels rotate at high speed driven by the mechanical transmission device, and the two sides of the flat copper wire are rubbed by the rough surfaces to remove the enamel on the enameled flat copper wire, greatly improving work efficiency. It eliminates the chemical agents required in traditional processes, avoids harm to the human body or the environment, and at the same time avoids corrosion of the copper wire body caused by chemical agents, improving product quality.

规 格

Installation and Operation
Select a suitable stripping wheel and install it on the machine. Place the enameled wire between the two stripping wheels and adjust the two wheels until the enameled wire is gently clamped. Hold the coil part by hand and turn on the switch to test the stripping effect. The ideal stripping effect can be achieved by adjusting the pressure of the contact surfaces between the stripping wheels.
During operation, place the enameled wire in the middle between the stripping wheels, then gently pull the enameled wire out from between the stripping wheels to complete the stripping work. When the machine is running, the stripping wheels rotate at high speed to grind off the insulating enamel or oxides on the enameled wire, and the surface of the stripped enameled wire is bright and clean.
When the stripping wheel needs to be replaced, simply pull the unusable wheel off the shaft and insert a new one to resume operation.