根据表格内磨轮Specifications, 安装合适的磨轮在机器上, 磨轮锥形部份向上, 将一根漆包线放在两只磨轮的中间, 调校两只磨轮至漆包线轻轻被夹紧, 用手握住线圈部份然后启动开关, 试验脱漆效果. The enameled wire stripping machine can control and achieve the ideal paint stripping effect by adjusting the pressure of the contact surfaces between the grinding wheels.
When the surface of the grinding wheel becomes uneven or bumpy during operation, it will cause wire breakage and incomplete paint stripping. In this case, the grinding wheel needs to be dressed. You can use abrasive cloth to dress and flatten the conical part of the grinding wheel until the conical parts of the two grinding wheels can make flat contact. Dressing the grinding wheels regularly during operation can increase the service life of the grinding wheels.
锥形设计的磨轮, 漆包线剥漆机是可利用在轴上的轴环将磨轮向上移动, 直至损耗到整顿个磨办的底部, 为方便操作, 磨轮的内孔是直接装插在轴上, 所以当需要换新的磨轮时, 只要将不能再使用磨轮由轴上抽出, 然后插上新的磨轮, 即可重新开始工作.
During operation, place the enameled wire at the top between the two grinding wheels, then gently pull the enameled wire out from the bottom between the grinding wheels from top to bottom, and the paint stripping work is complete. Because when the machine is running, the fiber grinding wheels rotate at high speed to grind off the insulating enamel or oxide on the enameled wire. After paint stripping, the copper wire surface of the enameled wire is bright and clean. The paint stripping effect is better for a single enameled wire.