SZ-168多股漆包线磨漆机, 独有设计的'全接触'高速磨轮,能自动调校线身弧度,能彻底清除线面上任何坚硬的绝缘漆, 而绝不损害铜线本身. The stripping operation is fast and safe, with no serious pollution or hazards. Applicable wire diameter range: 0.10mm-3.8mm and above (the adjustment device has been improved). Suitable for round and square wires, and can process multiple strands of enameled wire at the same time. Easy to operate with excellent results.
Machine Model | SZ-168 | Applicable Wire Diameter | 0.10-3.8mm |
Machine Size | 390x 280x 260mm | Operating Voltage | 220v/50Hz |
Motor Power | 370W | Speed | 3330r/min |
Machine Weight | 28kg | Optional Accessories | Nylon Fiber Wheel or Steel Wire Wheel |
Belt Size | 750x30x2mm | Stripping Length | 3mm - Unlimited |
Installation and Operation:
Install suitable grinding wheels on the machine. Place one or more enameled wires between the two grinding wheels and adjust the two wheels until the wires are gently clamped. Hold the coil part by hand and turn on the switch to test the stripping effect. The ideal stripping effect can be achieved by adjusting the pressure of the contact surfaces between the grinding wheels.During operation, place the enameled wire between the two grinding wheels, then pull the wire easily out from between the grinding wheels, and the paint stripping work is complete.After stripping, the copper wire surface of the enameled wire is bright and clean.
Product Description:
This machine can strip wire diameters such as: about 0.30mm with 30 strands.While improving the machine products, the supporting products must also keep pace at the same time.However, please note: different manufacturers have different products.It is inevitable that there is a problem of large pulling force during operation.With thicker wire diameters and more wire ends, the next consideration is to cooperate with the manufacturer to further improve the supporting fixtures.Work together with the manufacturer's technicians to develop the operating process.
In addition to steel wire wheels, this machine can also be fitted with suitable stripping fiber wheels.The first step is to level the parallelism between the two wheels.The specific method is: adjust the gap between the two wheels according to the size of the dedicated mesh abrasive cloth, turn on the power, and use the mesh abrasive cloth to dress the flatness of the two wheels.At the same time, the adjustment device must also be coordinated accordingly.Once leveled, the wheels are ready for operation.Suitable stripping wire diameter: 0.1-0.93mm range.Fine wires can be processed in multiple strands; widely used for copper (aluminum) wire and copper-clad aluminum wire.The surface after paint removal is bright, and the copper (aluminum) wire or copper-clad aluminum wire itself is absolutely undamaged. Users can choose and use it with confidence.