深圳市AOLITE电子制品配件有限公司最新研制, 开发出来的新款产品: SZ-180B型四爪式产品, 采用最新型的加工工艺, 独有设计而成. The cutter is made of four extra-hard tungsten steel alloy bars.Based on the principle of centripetal point cutting with adjustable taper of the edge.A unique design for convenient and fast chip removal.Based on easy disassembly, convenient adjustment and flexible use of the safety cover, it truly delivers what users want and what users urgently need.Since its launch on the market, this product has won the trust and praise of users.In the current use by users, this product has improved work efficiency by 10 times on the basis of the original -6 (standard type) machine in the market (the result of operating both machines in the same shift at the user's site).It solves the problem that wires with slightly bent diameters cannot be stripped cleanly in one pass.This product is currently a reliable, safe and ideal product for users.
SZ-180B four-claw new model enameled wire paint scraping machine, applicable wire diameter range: (approx. 0.45-5).It can completely remove any hard insulating enamel, enamel, ML, lsonel, etc. from the wire surface, without damaging the copper wire itself.Especially suitable for applications where paint needs to be stripped right down to the bottom of the coil. Easy to operate with excellent results. The SZ-180B new four-claw paint scraping machine is equipped with a stripping length stop device, which can accurately control the stripping length of enameled wire. The stripping operation is fast and safe, with no serious pollution or hazards.
Model | SZ-180B New Four-Claw Type | Applicable Wire Diameter | Approx. 0.45-5mm |
Machine Size | 280*200*150mm | Operating voltage | 220V/50Hz |
Motor Power | 120W | Motor Speed | 2800r/min |
Machine Weight | 6.5KG | Cutter material | Made of hard tungsten steel alloy |
Brand | AOLITE | Stripping Length | 5mm-90mm |
Operation Method: [See the operation example diagram in the manual for details]
A. Plug into a 220V AC power supply.
B. First remove the protective cover of the cutter head. Adjust the scraping edge according to the required wire diameter;Loosen the headless hexagon socket screws that fix the edge and the required positioning (see the example diagram for details).
C. Turn the adjusting nut (to adjust the size of the scraping edge: clockwise to enlarge, counterclockwise to reduce). Generally, first set the edge opening slightly larger than the enameled wire diameter, then clamp the shank. Hold the enameled wire in one hand and turn the adjusting nut with the other until the edge slightly rubs against the surface of the wire diameter; then lock all the screws to be fixed.
D. Adjust and lock the limit pin in place, then install the protective cover.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire to be scraped level and insert it into the feed inlet to start paint stripping.
