0.25mm线径去漆到根部首款自动漆包线剥漆机SZ-180C
The SZ-180C automatic enameled wire stripping machine is our company's latest successfully developed new product, uniquely designed with the latest processing technology.The cutter head is made of four extra-hard tungsten steel alloy bars.Based on the principle of centripetal point cutting with adjustable taper of the edge.A unique design for convenient and fast chip removal.Based on easy disassembly, convenient adjustment and flexible use of the safety cover, it truly delivers what users want and what users urgently need.Since its launch on the market, this product has won the trust and praise of users.SZ-180C自动漆包线剥漆机It solves the problem that wires with slightly bent diameters cannot be completely stripped in one pass, and the problem of slow cutter adjustment for different wire diameters during production. This product is currently a reliable, safe and ideal product for customers.(The same set of cutters can handle different wire diameters; a one-time cutter adjustment takes only about ten seconds.)
SZ-180C new model four-claw enameled wire paint scraping machine, applicable wire diameter range: (approx. 0.25-4.5).It can completely remove any hard insulating enamel, enamel, ML, lsonel, etc. from the wire surface, without damaging the copper wire itself.Especially suitable for applications where paint needs to be stripped right down to the bottom of the coil. Easy to operate with excellent results. The SZ-180C new four-claw enameled wire stripping machine is equipped with a stripping length stop device, which can accurately control the stripping length of enameled wire. The stripping operation is fast and safe, with no serious pollution or hazards.
Model: SZ-180C new model Applicable wire diameter: approx. 0.25-4.5mm
Machine size: 175*175*150mm; Operating voltage: 220V/50Hz
Motor power: 120W; Motor speed: 2800r/min
Machine weight: 7.8KG; Cutter material: made of hard tungsten steel alloy
Brand: Shenzhen AOLITE; Stripping length: 0mm-90mm
Operation Method: [See the operation example diagram in the manual for details]
A. Plug into a 220V AC power supply.
B. First remove the protective cover of the cutter head. Adjust the scraping edge according to the required wire diameter;Loosen the headless hexagon socket screws that fix the edge and the required positioning (see the example diagram for details).
C. Turn the adjusting nut (to adjust the size of the scraping edge: clockwise to enlarge, counterclockwise to reduce). Generally, first set the edge opening slightly larger than the enameled wire diameter, then clamp the shank. Hold the enameled wire in one hand and turn the adjusting nut with the other until the edge slightly rubs against the surface of the wire diameter; then lock all the screws to be fixed.
D. Adjust and lock the limit pin in place, then install the protective cover.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire to be scraped level and insert it into the feed inlet to start paint stripping.
Operation Method: [See the operation example diagram for details
