SZ-168高性能漆包线脱漆机, 独有最新设计的"全接触"高速磨轮,能自动调校线身弧度,能彻底清除线面上任何坚硬的绝缘漆, 搪瓷漆, ML, lsonel等, 而绝不损害铜(铝)线本身. With no serious pollution or hazards, the stripping work is fast and safe. Applicable wire diameter range: 0.08mm-3.8mm, suitable for round wires and square wires, and multiple strands of enameled wire can be processed at the same time. Easy to operate with excellent results.
Specifications
Model: SZ-168; Applicable wire diameter: 0.08-3.8mm
Machine Size 480x300x250mm Operating voltage 220v/50Hz
Motor power: 550W; Speed: 3330r/min
Machine Weight 27kg Optional Accessories Nylon Fiber Wheel or Steel Wire Wheel
Belt size: 730x30x2mm; Stripping length: 3mm-unlimited
Installation and Operation
Select a suitable stripping wheel and install it on the machine. Place the enameled wire between the two stripping wheels and adjust the two wheels until the enameled wire is gently clamped. Hold the coil part by hand and turn on the switch to test the stripping effect. The ideal stripping effect can be achieved by adjusting the pressure of the contact surfaces between the stripping wheels.
During operation, place the enameled wire between the two stripping wheels, then pull the wire easily out from between the stripping wheels, and the stripping work is complete. When the machine is working, the high-speed rotating stripping wheels grind off the insulating enamel or oxide on the enameled wire, and the surface of the stripped enameled wire is bright and clean.
When the surface of the nylon fiber stripping wheel becomes uneven or bumpy during operation, it will cause wire breakage or incomplete stripping. In this case, the stripping wheel needs to be dressed. Use emery cloth to dress and grind the stripping wheel flat until the two wheels can make flat contact. Dress the stripping wheels regularly during operation, which can extend the service life of the stripping wheels.
When the stripping wheel needs to be replaced, simply pull the unusable wheel off the shaft and insert a new one to resume operation.(When installing the steel wire stripping wheel, note that the steel wire wheel is directional
