The ABISOFIX handheld enameled wire stripping machine consists of two independent parts: the stripping machine body and the speed controller. It is lightweight and flexible to operate, specially designed for coil and electrical appliance manufacturing industries.The machine body consists of an electric motor and a stripping cutter head.The cutter head has three independent hard blades, which can completely remove any hard insulating enamel, enamel, ML, Lsonel, etc. from the wire surface without damaging the copper wire itself. The stripping operation is fast and safe, with no serious pollution or hazards.The 4510 wire stripping machine is equipped with three different types of cutter heads for different wire diameters.
Specifications:
Model: 4510; Applicable wire diameter: 0.2~4.5mm
Machine Size
178x115x55mm
Operating voltage: 220V/50Hz
Motor power: 25W; Speed: 0-8000r/min
Machine weight: 1.8kg; Optional accessory: three-claw cutter head
Stripping length: 2-50mm; Brand: ABISOFIX
Installation and Operation
Insert the enameled wire into the center of the cutter holder and press the start switch; the motor starts running immediately.Slowly pull the enameled wire out of the cutter holder, and the stripping work is complete.
Adjust the blade speed according to the wire diameter: the finer the wire diameter, the lower the speed required; the thicker the wire diameter, the higher the speed should be.
Technical Data:
No. 1 cutter head (applicable wire diameter range: 0.2mm - 0.8mm diameter)
No. 3 cutter head (applicable wire diameter range: 0.6mm - 2.0mm diameter)
No. 5 cutter head (applicable wire diameter range: 1.2mm - 4.5mm diameter)
