The SZ-168B multi-strand wire enamel grinding machine | multi-strand enameled wire paint stripping machine features a uniquely and newly designed "full-contact" high-speed special stripping steel wire wheel, which automatically adjusts to the curvature of the wire and can completely remove any hard insulating enamel, enamel, ML, lsonel, etc. from the wire surface without damaging the copper (aluminum) wire itself.Without serious pollution or hazards, the stripping work is fast and safe. Applicable wire diameter range: 0.10mm-10mm, applicable wire diameter range: 0.10mm-10mm, suitable for round and square wires. It can process 200 strands of 0.6mm multi-strand enameled wire and 1mm*1mm to 45mm*45mm flat enameled wire at the same time. Easy to operate with excellent results. Product note: can be equipped with a vacuum cleaner.
Specifications
| Machine Model | SZ-168B | Applicable Wire Diameter | 0．10－10mm |
| Machine Size | 485x305x250mm | Operating Voltage | 220v/50Hz |
| Motor Power | 550w | Speed | 3330r/min |
| Machine Weight | 35kg | Optional Accessories | Steel wire wheel |
| Belt Size | 730x30x2mm | Stripping Length | 3mm - Unlimited |
Installation and Operation
Select a suitable stripping wheel and install it on the machine. Place the enameled wire between the two stripping wheels and adjust the two wheels until the enameled wire is gently clamped. Hold the coil part by hand and turn on the switch to test the stripping effect. The ideal stripping effect can be achieved by adjusting the pressure of the contact surfaces between the stripping wheels.
During operation, place the enameled wire between the two stripping wheels, then pull the wire easily out from between the stripping wheels, and the stripping work is complete. When the machine is working, the high-speed rotating stripping wheels grind off the insulating enamel or oxide on the enameled wire, and the surface of the stripped enameled wire is bright and clean.
When the surface of the nylon fiber stripping wheel becomes uneven or bumpy during operation, it will cause wire breakage or incomplete stripping. In this case, the stripping wheel needs to be dressed. Use emery cloth to dress and grind the stripping wheel flat until the two wheels can make flat contact. Dress the stripping wheels regularly during operation, which can extend the service life of the stripping wheels.
When the stripping wheel needs to be replaced, simply pull the unusable wheel off the shaft and insert a new one to resume operation.(When installing the steel wire stripping wheel, note that the steel wire wheel is directional.)
