SZ-188扁平漆包线脱漆机|多股线磨漆机包括机械传动装置, 它还包括有两个剥漆轮, 包括第一剥漆轮和第二剥漆轮, 第一剥漆轮和第二剥漆轮分别由机械传动装置驱动, 第一剥漆轮与第二剥漆轮的表面粗糙, 漆包扁铜线伸入第一剥漆轮和第二剥漆轮之间的间隙里, 其优点是漆包扁铜线伸入第一剥漆轮和第二剥漆轮之间的间隙里, 有粗糙表面的第一剥漆轮和第二剥漆轮在机械传动装置的高速转动下, 包扁铜线的两侧受粗糙表面的摩擦而将漆包扁铜线上的漆去除, 大大地提高了工作效率, 其省去了传统工艺中的需要的化学药水, 避免了对人体或环境造成的损害, 同时避免化学药水对铜线本体造成的腐蚀影响, 提高了产品的质量.
规 格
Machine Model | SZ-188 | Applicable Wire Diameter | 0.2mm-10mm round wire 1*1 and 50mm*50mm flat wire |
Motor Power | 450W*2 | Operating Voltage | 220v/50Hz |
Machine Weight | 85kg | Speed | 1400r/min |
Stripping Length | 5mm-100mm | Optional Accessories | Steel wire wheel |
Installation and Operation
Select a suitable stripping wheel and install it on the machine. Place the enameled wire between the two stripping wheels and adjust the two wheels until the enameled wire is gently clamped. Hold the coil part by hand and turn on the switch to test the stripping effect. The ideal stripping effect can be achieved by adjusting the pressure of the contact surfaces between the stripping wheels.
During operation, place the enameled wire in the middle between the stripping wheels, then gently pull the enameled wire out from between the stripping wheels to complete the stripping work. When the machine is running, the stripping wheels rotate at high speed to grind off the insulating enamel or oxides on the enameled wire, and the surface of the stripped enameled wire is bright and clean.
When the stripping wheel needs to be replaced, simply pull the unusable wheel off the shaft and insert a new one to resume operation.
